Marquis K826 Specifications.

Motherboard:
nVidia nForce Pro based dual Opteron motherboard, ATX form factor

CPU:
AMD® Opteron® Model 2XX processors, .13 or .09 micron, 1M L2 cache, Socket 940, single core
AMD® Opteron® Model 26X/27X processors, .09 micron, 1M+1M L2 cache, Socket 940, dual core
64-bit integer registers, 128-bit SSE/SSE2 registeres
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
nVidia® nForce Pro 2200 (CK804) chipset
TI 1394a Firewire controller

Memory Subsystem:
Six DIMM banks supporting up to 12GB DDR400 or 24GB DDR333 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 11.4 GB/s (DDR333) or 12.8 GB/s (DDR400) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
ASUS Extreme N6200TC256/TD, Nvidia® GeForce PCX6200TC, PCI-Express x16, 64MB DDR, 350MHZ core, 350mhz DDR memory, 1x400Mhz RAMDAC, one digital port (DVI-D3), one analog port (DB-15), TV-Out1 (SVHS), single head display

Note: Connecting two monitors to the analog and digital ports will not enable dual head display.

Hard Disk Subsystem:
Hitachi Deskstar 7K80 80GB Serial ATA300 drive, 7200rpm, 8MB cache, 3 year warranty

SCSI Subsystem:
Onboard 4-port nForce Serial ATA II controller
Onboard 4-port Silicon Image 3114A Serial ATA controller

ATA Subsystem:
Dual channel Ultra ATA/133 bus mastering IDE controllers

CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:
Onboard Realtek ALC850 audio

Network Subsystem:
Onboard Broadcom BCM5751 PCI-Express Gigabit Ethernet adapter

System Slots:
One (1) PCI-Express x16 graphic slot
One (1) PCI-Express x1 slot
Two (2) 32-bit/33MHz bus mastering PCI slots

System I/O:
One (1) RS-232C 16550 serial port
One (1) ECP/EPP Bi-directional parallel port
Four (4) USB 2.0 ports (rear)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) Line in, MIC, and Speaker port
One (1) Optical S/PDIF out port
One (1) Coaxial S/PDIF out port
One (1) RJ-45 Ethernet port
One (1) IEEE1394a Firewire port

Floppy Drive:
1.44M 3.5-inch drive2

Mouse:
Logitech Optical Wheel Mouse, PS/2

Keyboard:
Keytronic KT-2000 104-key PS/2 keyboard

Chassis:
E-ATX Mid Tower case, FCC Class B, black bezel (standard) / beige (optional)
Sample Chassis Images:
     Front View, Front View w/ Hotswap Backplane
Two (2) front accessible USB 2.0 ports
Security locks for the front panel and side panel
650W EPS12V power supply with PFC
Three (3) accessible 5.25" drive bays
Four (4) internal 3.5" fixed drive bays (optional hotswap SATA/SCSI backplane)
One (1) 12cm outtake fan, ball bearing, low noise
One (1) 9cm HD cooling fan, ball bearing, low noise
Dimensions: 533mm (D) x 198mm (W) x 425mm (H)

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. TV-Out is not supported under Linux.
  2. Floppy drive occupies one of the 5.25in drive bay.
  3. Digital port not compatible with monitors that use DVI-I cable.
Phone: 1.877.ASL.3535