Marquis C730 Specifications.

Motherboard:
Supermicro X8DAL-i workstation board, ATX form factor

CPU:
Intel Xeon 5500 series processors (Gainestown), 4x256MB L2 cache, 8MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Intel Xeon 5600 series processors (Westmere), 6x256MB L2 cache, 12MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Chipset:
Intel 5500 (Tylersburg) chipset
ICH10R 6-port SATA II controller with HostRAID1

Memory Subsystem:
Six 240-pin DIMM banks supporting up to 48GB DDR3 ECC registered memory, 3 memory slots per CPU bank, triple channel memory bus

Note: Triple channel memory bus requires 3 modules installed per CPU bank.
Note: Two processors are required to populate 6 memory modules.
Note: Memory bus speed varies from 1066mhz or 1333mhz.

Graphic Subsystem:
ASUS ENGT430/DI/1GD3 (LP) Nvidia® GeForce GT 430, PCI-Express x16, 1GB DDR3, one digital port (DVI-I), one HDMI port, one analog port (DB-15), dual head display

Hard Disk Subsystem:
Up to four Serial ATA II hard drives in capacity from 250GB to 3TB. These drives can be configured as standalone, software RAID (730-T) or hardware RAID (730-SR)

SCSI Subsystem:
(C730-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

(C730-SR) 3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
24X DVD+-RW dual layer optical burner, Serial ATA interface

Sound Subsystem:
Onboard Realtek ALC883 7.1 AC'97 audio CODEC

Network Subsystem:
Onboard Intel 82574L PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45

System Slots:
One (1) PCI Express x16 (v2.0) slot (x16 signal)
One (1) PCI Express x16 (v2.0) slot (x4 signal)
One (1) PCI Express x4 slot (x4 signal)
Two (2) 32-bit/33MHz bus mastering PCI slots, 3.3V

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) Line in, MIC, and Speaker port
One (1) Side Surround, Back Surround, and Center/LFE port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
Optional

Mouse:
Logitech Optical Wheel Mouse, USB

Keyboard:
Keytronic KT-2000 104-key PS/2 keyboard

Chassis:
E-ATX Mid Tower case, FCC Class B, black bezel (standard) / beige (optional)
Chassis Images:
     Front View, Front View w/ Hotswap Backplane
Security locks for the front panel and side panel
850W EPS12V green power supply with active PFC
Three (3) accessible 5.25" drive bays
SAS backplane supporting four hotswap hard drives
One (1) 12cm exhaust fan, ball bearing, 4-pin PWM
One (1) 9cm front fan, ball bearing, 4-pin PWM
One (1) 8cm HD cooling fan, ball bearing
Active CPU heatsink with 4-pin PWM fan
Dimensions: 533mm (D) x 198mm (W) x 425mm (H)

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID function is not supported under Linux.
Phone: 1.877.ASL.3535