Sovereign 4975 Specifications.

Nvidia nForce Pro 2200 Dual Opteron server board, E-ATX

AMD® Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Quad Core Opteron® Model 2300 processors, 65nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Nvidia nForce Pro 2200 HyperTransport I/O Hub
Intel PXH-V HyperTransport PCI-X 2.0 Tunnel

Memory Subsystem:
Sixteen DIMM banks supporting up to 64GB DDR2-667 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Onboard ATI ES1000 with 32MB display ram

Hard Disk Subsystem:
Up to twenty four Serial ATA II hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 6, 10, hotspare supported

ATA Subsystem:
Onboard dual channel Ultra ATA/133 controllers

SCSI Subsystem:
Onboard nForce Pro 2200 4-port Serial ATA II controller

3Ware Escalade 9650SE-24M8 Serial ATA II RAID controllers, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Expess x8, 512MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Optional via external USB port

Sound Subsystem:

Network Subsystem:
Two onboard Broadcom BCM5721 PCI-Express Gigabit controllers, 1000BaseTX
Optional Intelligent Platform Management Interface

System Slots:
Three (3) 64-bit/100MHz bus mastering PCI-X slots2
One (1) PCI-Express x4 slot
One (1) HTX slot
One (1) 32-bit/33MHz bus mastering PCI slot
One (1) IPMI slot

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
One (1) 15-pin VGA port

Floppy Drive:
1.44MB external USB floppy drive



ASL 4U Rack mount chassis, FCC Class B
950W 2+1 hotswap and redundant EPS12V power supply
Dimensions: 7" (H) x 19" (W) x 25.6" (D)
Six Multi-lane SAS backplanes
Twenty four (24) hotswap SATA hard drive bays
Two (2) 97mm hotswap blowers
Two (2) 6cm rear fans
28in sliding rails kit

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535