Motherboard:
AMD Dual Opteron server motherboard, E-ATX form factor
CPU:
AMD® Opteron® Model 2XX processors, .13 or .09 micron, 1M L2 cache, Socket 940, single core
AMD® Opteron® Model 2X5 processors, .09 micron, 2M1 L2 cache, Socket 940, dual core
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions
Chipset:
AMD-8111 HyperTransport I/O Hub
AMD-8131 HyperTransport PCI-X Tunnel
Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR400 or 32GB DDR333 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 11.4 GB/s (DDR333) or 12.8 GB/s (DDR400) accumulated memory bandwidth
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of two modules are required per processor.
Graphic Subsystem:
Integrated ATI Rage XL 8MB
Hard Disk Subsystem:
Up to twenty four Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 10, hotspare supported
ATA Subsystem:
Integrated dual channel Ultra ATA/133 controllers
SCSI Subsystem:
(4970-TR) Two 3Ware Escalade 9500S-12MI Serial ATA RAID controllers, Multi-lane, RAID level 0, 1, 5, 10 & JBOD, 64-bit/66mhz, 128MB ECC cache, optional Battery Backup Unit (BBU)
(4970-TR2) Two 3Ware Escalade 9550SX-12MI Serial ATA II RAID controllers, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 256MB ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
Optional via external USB port
Sound Subsystem:
None
Network Subsystem:
Two onboard Broadcom BMC5704C 10/100/1000Mbps Gigabit Ethernet adapters
Optional Intelligent Platform Management Interface
System Slots:
Four (4) 64-bit/100MHz bus mastering PCI-X slots2
Two (2) 32-bit/33MHz bus mastering PCI slots
One (1) IPMI slot
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 1.1 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
One (1) 15-pin VGA port
Floppy Drive:
Optional via external USB port
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 4U Rack mount chassis, FCC Class B
950W 3+1 hotswap and triple redundant EPS12V power supply
Dimensions: 7" (H) x 19" (W) x 25.6" (D)
Six Multi-lane SATA backplanes
Two (2) 97mm hotswap blowers
Two (2) 6cm rear fans
Sliding rails kit
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system