Sovereign 3955 Specifications.
Motherboard:
Nvidia nForce Pro 2200 Dual Opteron server board, E-ATX
CPU:
AMD® Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Quad Core Opteron® Model 2300 processors, 65nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions
Chipset:
Nvidia nForce Pro 2200 HyperTransport I/O Hub
Intel PXH-V HyperTransport PCI-X 2.0 Tunnel
Memory Subsystem:
Sixteen DIMM banks supporting up to 64GB DDR2-667 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s accumulated memory bandwidth
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.
Graphic Subsystem:
Onboard ATI ES1000 with 32MB display ram
Hard Disk Subsystem:
Up to twelve Serial ATA II hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 6, 10, hotspare supported
ATA Subsystem:
Onboard dual channel Ultra ATA/133 controllers
SCSI Subsystem:
Onboard nForce Pro 2200 4-port Serial ATA II controller
One 3Ware Escalade 9650SE-12ML Serial ATA II RAID controllers, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 256MB ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
16X DVD+-RW dual layer optical writer
Sound Subsystem:
None
Network Subsystem:
Two onboard Broadcom BCM5721 PCI-Express Gigabit controllers, 1000BaseTX
Optional Intelligent Platform Management Interface
System Slots:
Three (3) 64-bit/100MHz bus mastering PCI-X slots2
One (1) PCI-Express x4 slot
One (1) HTX slot
One (1) 32-bit/33MHz bus mastering PCI slot
One (1) IPMI slot
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
One (1) 15-pin VGA port
Floppy Drive:
1.44MB floppy drive
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 3U Rack mount chassis, FCC Class B
One (1) slim CDROM bay
One (1) 5.25in drive bay
One (1) 3.5in drive bay
650W hotswap and redundant EPS12V power supply
Dimensions: 5.25" (H) x 19" (W) x 27" (D)
Three (3) Multi-lane SAS backplanes
Twelve (12) hotswap SATA hard drive bays
Three (3) 8cm hotswap centered fans
Two (2) 4cm hotswap centered fans
Two (2) 6cm rear fans
26in sliding rails kit
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system
- Slot is incompatible with 5V PCI add-on card.