• Company
• Products
• Support
• Ordering
• Warranties & Policies

Sovereign 3892 Specifications.

Motherboard:
(3892-SR) Supermicro X9DRi-LN4F+ server board
(3892-SRT) Supermicro X9DRE-TF+ server board

CPU:
Intel Xeon E5-2600 series processors, up to 20MB L3 cache, up to 8GT/s QuickPath Interconnect, Sandy Bridge-EP core, HyperThreading (SMT), Socket LGA2011

Intel Xeon E5-2600 v2 series processors, up to 30MB L3 cache, up to 8GT/s QuickPath Interconnect, Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011

Chipset:
(3892-SR) Intel C602 server chipset
(3892-SRT) Intel C602j server chipset

Memory Subsystem:
Twenty four 240-pin DIMM banks supporting up to 768GB DDR3 ECC registered memory, 12 memory slots per CPU bank, Quad channel memory bus

Note: Quad channel memory bus requires 4, 8 or 12 modules installed per CPU bank.
Note: Two processors are required to populate 16, 20 or 24 memory modules.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 16M display ram

Hard Disk Subsystem:
Up to sixteen (16) SAS or SATA drives. These drives can be configured as standalone unit or hardware RAID.

Note: Using SAS and SATA drives together is an unsupported configuration.

SATA Subsystem:
(3892-SR) Eight (8) SATA 3Gbs ports via C602 chipset
(3892-SRT) Four (4) SATA 3Gbs ports via C602 chipset
Two (2) SATA 6Gbs ports via C602 chipset

SCSI Subsystem:
3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Optional slim DVD optical reader/writer

Sound Subsystem:
None

Network Subsystem:
(3892-SR) Onboard Intel i350A Quad-port PCI-Express Gigabit Ethernet controller, 1000BaseT, RJ-45
(3892-SRT) Onboard Intel X540 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots:
(3892-SR)
Four (4) PCI Express x16 (v3.0) slots
One (1) PCI Express x8 (v3.0) slot
One (1) PCI Express x8 (v3.0) slot (x4 signal)

Note: Two processors are required to support expansion slots 4,5,6

(3892-SRT)
Two (2) PCI Express x16 (v3.0) slots
Four (4) PCI Express x8 (v3.0) slots

Note: Two processors are required to support expansion slots 3,5,6

System I/O:
One (1) RS-232C 16550 serial port (front access)
One (1) RS-232C 16550 serial port (rear access)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (front access)
Four (4) USB 2.0 ports (rear access)
(3892-SR) Four (4) RJ-45 Ethernet ports
(3892-SRT) Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 3U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
920W EPS12V redundant & hotswap power supply, 80Plus Platinum Level, 94% efficiency
Chassis and CPU overheat alarm with front LED indication
Dimensions: 5.2in (H) x 17.2in (W) x 25.5in (D)
SAS2 backplane with single LSI SAS2X28 expander
Sixteen (16) hotswap 3.5in hard drive bays (front access)
Optional two (2) hotswap 2.5in hard drive bays (rear access)
Five (5) 8cm hotswap cooling fans, double ball bearing
Tool-less sliding rails kit

Preinstalled Software:
Fedora or CentOS, 64-bit operating system