Omega 9320 Specifications.

Nvidia nForce Pro 2200 Dual Opteron server platform

AMD® Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Quad Core Opteron® Model 2300 processors, 65nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Note: Omega 9320-SS does not support Opteron SE processors due to power supply limitation.

Nvidia nForce Pro 2200 HyperTransport I/O Hub
Intel PXH-V PCI-X I/O Hub
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
Sixteen DIMM banks supporting up to 32GB DDR2-667 or 64GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s (DDR2-667) or 16.8 GB/s (DDR2-533) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Onboard ATI ES1000 with 32MB display ram

Hard Disk Subsystem:
(9320-SS) Up to eight SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

(9320-TR2) Up to eight Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or disk array(s) using hardware RAID

SCSI Subsystem:
Onboard nForce4 4-port Serial ATA II controller

(9320-SS) Onboard LSI 1068 8-port PCI-X SAS controller

(9320-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:

Network Subsystem:
Two onboard Broadcom BCM5721 PCI-Express Gigabit controllers, 1000BaseTX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)

System Slots:
One (1) PCI-Express x16 slot (x8 link)
One (1) HTX slot
Three (3) 133/100mhz PCI-X expansion slots
One (1) 32-bit/33mhz PCI slot
One (1) BMC (IPMI) slot

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
1.44MB floppy drive



ASL 3U Rack mount chassis, FCC Class B
Air Shroud and aluminum-based CPU heatsinks (passive design)
(9320-SS) 550W EPS12V fixed power supply with active PFC
(9320-TR2) 760W EPS12V hotswap and triple redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 5.1" (H) x 17.1" (W) x 25.5" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay (used)
Two (2) accessible 5.25" drive bays
SAS backplane without enclosure management

  • Eight (8) hotswap hard drive bays

Four (4) 9cm hotswap center fans, double ball bearing
Two (2) 8cm hotswap rear exhaust fans, double ball bearing
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

Phone: 1.877.ASL.3535