Omega 9114 Specifications.

Motherboard:
nVidia nForce Pro 3400 single Opteron server motherboard, ATX form factor

CPU:
AMD® Athlon® 64 processor, 90nm, 512K L2 cache, Socket AM2

AMD® Athlon® 64 FX, 90nm, 1M L2 cache, Socket AM2

AMD® Athlon® 64 X2 processor, 65/90nm, 2x512K or 2x1M L2 cache, Socket AM2, dual core

AMD® Phenom® X3 processor, 65nm, 3x512K L2 cache, 2M L3 cache, Socket AM2, triple core

AMD® Phenom® X4 processor, 65nm, 4x512K L2 cache, 2M L3 cache, Socket AM2, quad core

AMD® Opteron® Model 1000 processor, 90nm, 2x1M L2 cache, Socket AM2, dual core

AMD® Opteron® Model 1300 processor, 65nm, 4x512K L2 cache, 2M L3 cache, Socket AM2, quad core

64-bit integer registers, 128-bit SSE/SSE2 registeres
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
nVidia nForce Pro 3400 chipset
nVidia MCP55 Serial ATA II controller, six ports
nVidia MCP55 UltraATA/133 IDE controller, single channel

Memory Subsystem:
4 DIMM banks supporting up to 8GB DDR2-800 ECC unbuffered SDRAM, two-way interleaved memory (128-bit)

Note: To enable 128-bit memory access, modules must be populated in pairs

Graphic Subsystem:
Onboard XGI Volari XG20 with 16MB video ram

Hard Disk Subsystem:
Up to four Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (9114-T) or hardware RAID (9114-TR2) (level 0, 1, 5, 10, hotspare supported)

SCSI Subsystem:
(9114-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Slim 24X optical reader

Sound Subsystem:
None

Network Subsystem:
Two onboard nVidia MCP55 Gigabit controllers, 1000BaseTX
Optional Intelligent Platform Management Interface

System Slots:
One (1) PCI-Express x16 slot (used on 9114-TR2)

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
350W EPS12V power supply with PFC
Dimensions: 1.72" (H) x 17.2" (W) x 22.4" (D)
One (1) accessible slim size CDROM bay
One (1) SAS/SATA backplane
Four (4) hotswap Serial ATA hard drive bays
Four (4) 14K 40x40x28mm cooling fans with fan speed monitor
Copper-based passive heatsink and air duct for the processor
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

Phone: 1.877.ASL.3535