Monarch 8850 Specifications.

Motherboard:
AMD Octet dual core Opteron server platform
Four (4) dual socket CPU boards
One (1) slot board
One (1) I/O board

CPU:
AMD® Opteron® Model 8XX processors, .13 or .09 micron, 1M L2 cache, Socket 940, single core
AMD® Opteron® Model 86X/87X processors, .09 micron, 2M1 L2 cache, Socket 940, dual core
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
Nvidia nForce Pro 2200 and nForce Pro 2050
Two AMD-8132 HyperTransport PCI-X 2.0 Tunnels
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
Thirty two (32) DIMM banks supporting up to 64GB DDR400 or 128GB DDR333 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting up to 45.6 GB/s (DDR333) or 51.2 GB/s (DDR400) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of two modules are required per processor.
Note: To populate 32 memory modules, eight processors are required. To populate 24 modules, six processors are required. To populate 16 modules, four processors are required.

Graphic Subsystem:
ATI Rage 7000M PCI VGA with 8MB SDRAM

Hard Disk Subsystem:
Up to six Ultra 320/m SCSI hard drives (SCA-2) in capacity from 36GB to 300GB. These drives can be configured as standalone unit or software RAID (8850-S) or hardware RAID (8850-SR), level 0, 1, 5, 10, hotspare supported

SCSI Subsystem:
Onboard Adaptec 7902W dual channel Ultra 320/m SCSI-3 PCI-X controller

CD-ROM Subsystem:
8X slim DVDROM optical reader

Sound Subsystem:
None

Network Subsystem:
Two integrated Broadcom 5721 PCI-Express x1 Gigabit controllers, 1000BaseTX

IPMI 2.0 out-of-band remote server management adapter

System Slots:
Two (2) PCI-Express x16 slots
One (1) PCI-Express x4 slot
Five (5) 64-bit/66/100/133mhz PCI-X slots3

System I/O:
Two (2) RS-232C 16550 serial ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) USB 2.0 ports (front accessible)
Two (2) USB 2.0 ports
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
5U Rack mount chassis with rail kit, FCC Class B
Dimensions: 852.8mm (D) x 446.4mm (W) x 220.8mm (H)
1350W 3+1 hotswap and redundant EPS12V power supply
One (1) accessible slim 5.25" drive bay (used)
Six (6) hotswap SCA-2 hard drive bays
Two (2) 120mm hotswap chassis fans, 4000RPM
Two (2) 120mm easy swap chassis fans, 4000RPM
One (1) 60mm easy chassis fan, 6000RPM
Sliding rails kit

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit edition

  1. Each core has 1M L2 cache.
  2. Require Opteron processor with E4 stepping.
  3. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535