Monarch 1910 Specifications.
Motherboard:
Nvidia nForce Pro 2200 Dual Opteron server platform
CPU:
AMD® Dual Core Opteron® Model 2000 processors, .09 micron, 1M+1M L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions
Chipset:
Nvidia nForce Pro 2200 HyperTransport I/O Hub
Dual channel UltraDMA/133 bus mastering IDE controllers
Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-667 or 32GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s (DDR2-667) or 16.8 GB/s (DDR2-533) accumulated memory bandwidth
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.
Graphic Subsystem:
Onboard ATI ES1000 with 32MB display ram
Hard Disk Subsystem:
Up to two Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID.
SCSI Subsystem:
Onboard nForce4 4-port Serial ATA II controller
CD-ROM Subsystem:
16X DVD-ROM optical reader
Sound Subsystem:
None
Network Subsystem:
Two onboard Broadcom BCM5721 PCI-Express Gigabit controllers, 1000BaseTX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)
System Slots:
Two (2) PCI-Express x16 slots1 (half-length card only)
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear panel)
Two (2) USB 2.0 ports (front panel)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports
Floppy Drive:
None
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 1U Rack mount chassis, FCC Class B
500W EPS12V power supply with PFC
Dimensions: 43.6mm (H) x 445mm (W) x 670mm (D)
One (1) 5.25in optical drive bay (used)
Note: This drive bay only supports certain optical models from ASUS and Sony.
Serial ATA II backplane supporting two hotswap hard drives
Eight (8) 40mm system cooling fans
Copper-based passive heatsinks and air baffle for the processors
Sliding rails kit with telco mount support
Power, LAN1, LAN2, System Fail, and System ID LED
Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel
- 1. Slot operates in 8 lanes only.