Monarch 1900 Specifications.

Motherboard:
(1900-A) Supermicro i2DMR-iG2 dual Itanium 2 motherboard
(1900-S) Supermicro i2DMR-8G2 dual Itanium 2 motherboard

CPU:
Intel® Itanium® 2 processors, .13 micron
400mhz Front Side Bus
256K L2 cache and up to 6MB L3 cache
64-bit integer registers, 128-bit SSE/SSE2 registeres
48-bit virtual addresses, 40-bit physical addresses
Based on EPIC architecture

Chipset:
Intel E8870 dual Itanium 2 server chipset
Dual channel UltraDMA/100 bus mastering IDE controllers

Memory Subsystem:
8 DIMM banks supporting up to 16GB1 of PC-21002 ECC registered SDRAM, four-way interleaved memory, 6.4GB/s memory bandwidth

Note: Memory must be populated in group of four

Graphic Subsystem:
Integrated ATI Rage XL with 8MB SDRAM

Hard Disk Subsystem:
(1900-A) Western Digital Special Edition Caviar 80GB Ultra ATA/100 drive, 100MB/s, 7200rpm, 8MB cache, 3 year warranty
(1900-S) Seagate Cheetah 10K.6 ST336607LC 36.7GB Ultra 320/m hard drive, 10K rpm, 8MB cache, SCA-2

SCSI Subsystem:
(1900-S) Integrated Adaptec AIC-7902W dual channel Ultra 320/m SCSI-3 controller

CD-ROM Subsystem:
24X Ultra DMA/33 slim CDROM reader

Sound Subsystem:
None

Network Subsystem:
Two integrated Intel 82546EB Gigabit Ethernet controllers, 1000BaseTX, 64-bit/100mhz PCI-X
Optional Intelligent Platform Management Interface (IPMI) board

System Slots:
One (1) 64-bit/133mhz bus mastering PCI-X slot3

System I/O:
One (1) RS-232C 16550 serial port (rear)
One (1) RS-232C 16550 serial port (front)
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports
(1900-S) One (1) VHDCI SCSI port (channel B)

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
500W coldswap power supply
Dimensions: 1.7" (H) x 17.2" (W) x 25.7" (D)
One (1) accessible slim CDROM drive bay (used)
(1900-A) Four (4) fixed 1" hard drive bays
(1900-S) Four (4) coldswap/hotswap4 1" hard drive bays
(1900-S) Ultra 320/m SCA backplane with SAF-TE (SCSI channel A)
Two (2) 10cm high speed classis blowers
One (1) 4cm high speed classis fan
26" sliding rails kit5

Preinstalled Software:
Red Hat Enterprise Linux WS 3.0 (Itanium6 2 Edition)

  1. 2GB memory modules have not been validated.
  2. Memory modules run at 200mhz speed.
  3. Slot is incompatible with 5V PCI add-on card.
  4. Hotswap requires a hardware RAID controller (not included).
  5. Telco or front mounting is not supported.
  6. Unlike the AMD Opteron architecture, the Intel Itanium 2 platforms run 32-bit applications at a very slow speed. Thus they should only be used in the 64-bit environment.
Phone: 1.877.ASL.3535