Lancelot 1891 Specifications.

Motherboard:

(1891-T/SR) Supermicro X10DRW-N server board
(1891-TT/SRT) Supermicro X10DRW-NT server board

CPU:

Intel Xeon E5-2600 v4 series processors, up to 22 cores, up to 9.6GT/s QuickPath Interconnect, Broadwell-EP core, HyperThreading (SMT), Socket LGA2011-3

Intel Xeon E5-2600 v3 series processors, up to 18 cores, up to 9.6GT/s QuickPath Interconnect, Haswell-EP core, HyperThreading (SMT), Socket LGA2011-3

Chipset:

Intel C612 server chipset

Memory Subsystem:

Sixteen (16) 240-pin DIMM banks supporting up to 1TB DDR4 ECC registered memory, 8 memory slots per CPU bank, Dual channel memory bus

Note: Dual channel configuration requires 2, 4, 6 or 8 modules per CPU bank
Note: Two processors are required to populate more than 8 memory modules.

Graphic Subsystem:

Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

Hard Disk Subsystem:

(1891-T/TT) Up to eight (8) SATA 2.5in hard drives. These drives can be configured as standalone units or software RAID.
(1891-SR/SRT) Up to eight (8) SATA or eight (8) SAS 2.5in hard drives. These drives can be configured as standalone units or hardware RAID.
Up to two (2) NVMe 2.5in hard drives. These drives can be configured as standalone units or software RAID.

Storage Controllers:

(1891-SR/SRT) 3Ware Escalade 9750-8i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)
Eight (8) SATA 6Gbs ports via C612 chipset
Two (2) NVMe/SATA3 hybrid ports

CD-ROM Subsystem:

None

Sound Subsystem:

None

Network Subsystem:

(1891-T/SR) Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
(1891-TT/SRT) Onboard Intel X540 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots:

Two (2) PCI Express x16 (v3.0) slots, full height, half length
Both processors must be installed to access the second x16 slot.
(1891-SR/SRT) When adding the BBU, the 2nd slot should not be used to ensure proper cooling of the battery backup unit.

System I/O:

One (1) RS-232C 16550 serial port (via header)
One (1) DB-15 VGA port
Two (2) USB 3.0 ports (front)
Four (4) USB 2.0 ports (rear)
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Mouse:

Optional

Keyboard:

Optional

Chassis:

ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 23.5" (D)
700W EPS12V redundant & hotswap power supply, 80Plus Platinum Level
SAS3 backplane with enclosure management
(1891-T/TT) Eight (8) 2.5in hotswap hard drive bays (SATA)
(1891-SR/SRT) Eight (8) 2.5in hotswap hard drive bays (SATA/SAS)
Two (2) 2.5in hotswap hard drive bays (NVMe U.2/SATA)
Five (5) 4cm counter-rotating chassis fans
Sliding rail kit

Preinstalled Software:

Fedora, Ubuntu or CentOS 64-bit operating system

Phone: 1.510.249.5900