Lancelot 4879 Specifications.
Motherboard:
(4879-SS) Supermicro X9DR3-F server board
(4879-SR) Supermicro X9DRi-F server board
(4879-SRT) Supermicro X9DRH-iTF server board
CPU:
Intel
Xeon E5-2600 series processors, up to
20MB L3 cache, up to
8GT/s QuickPath Interconnect,
Sandy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Intel
Xeon E5-2600 v2 series processors, up to
30MB L3 cache, up to
8GT/s QuickPath Interconnect,
Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Chipset:
(4879-SS) Intel
C606 server chipset
(4879-SR/SRT) Intel
C602 server chipset
Memory Subsystem:
Sixteen 240-pin DIMM banks supporting up to 512GB DDR3 ECC registered memory, 8 memory slots per CPU bank,
Quad channel memory bus
Note: Quad channel memory bus requires 4 or 8 modules installed per CPU bank.
Note: Two processors are required to populate 12 or 16 memory modules.
Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 16M display ram
Hard Disk Subsystem:
(4879-SS) Up to eight
SAS or eight
SATA drives. These drives can be configured as standalone unit or software RAID.
(4879-SR/SRT) Up to eight
SAS or eight
SATA drives. These drives can be configured as standalone unit or hardware RAID.
Note: Using SAS and SATA drives together is an unsupported configuration.
SATA Subsystem:
Two (2) SATA 6Gbs ports
Eight (8) SATA 3Gbs ports
SCSI Subsystem:
(4879-SS) Onboard Intel C606 8-port PCI-Express SAS 3Gbs controller
(4879-SR/SRT) 3Ware
Escalade 9750-8i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD,
PCI-Express x8, 512MB DDR2-800 ECC cache, optional
Battery Backup Unit (BBU)
CD-ROM Subsystem:
24X DVD+-RW dual layer optical burner, Serial ATA interface
Sound Subsystem:
None
Network Subsystem:
(4879-SS/SR) Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000Base-T, RJ-45
(4879-SRT) Onboard Intel X540 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
System Slots:
(4879-SS/SR)
Three (3) PCI Express x16 (v3.0) slots
Three (3) PCI Express x8 (v3.0) slots
Note: Two processors are required to support expansion slots 4,5,6
(4879-SRT)
One (1) PCI Express x16 (v3.0) slot
Six (6) PCI Express x8 (v3.0) slots
Note: Two processors are required to support expansion slots 4,5,6,7
System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Four (4) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
Floppy Drive:
None
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 4U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
920W EPS12V
redundant &
hotswap power supply,
80Plus,
94% efficiency
Chassis and CPU overheat alarm with front LED indication
Dimensions: 7in (H) x 17.2in (W) x 25.5in (D)
Three (3) 5.25in expansion drive bays
SAS backplane with enclosure management
Eight (8)
hotswap hard drive bays
Three (3) 9cm
hotswap center fans, double ball bearing
Two (2) 8cm
hotswap exhaust fans, double ball bearing
Sliding rails kit with telco mount support
Preinstalled Software:
Fedora or CentOS, 64-bit operating system