Motherboard:
Supermicro X6DHE-XG2 motherboard
CPU:
Intel Xeon processors, Nocona core, 1M full speed L2 cache,
800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604
Intel Xeon processors, Irwindale core, 2M full speed L2 cache,
800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604
Chipset:
Intel E7520 Lindenhurst server chipset
Intel ICH5R Southbridge and PCI-X Hub (PXH)
Dual channel DDR2-400 support 6.4GB/s memory bandwidth
Dual channel UltraDMA/100 bus mastering IDE controllers
Dual channel Serial ATA controller on ICH5R1 South Bridge
Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-400 ECC registered memory, single or dual channel memory access
Note: To enable dual channel memory (128-bit), modules must be populated in pairs.
Graphic Subsystem:
Integrated ATI Rage XL 8MB
Optional Nvidia GeForce/Quadro PCI-Express video card with OpenGL acceleration and multi-head displays
Hard Disk Subsystem:
(4860-S/SR) Up to eight Ultra 320/m SCSI hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (4860-S) or hardware RAID (4860-SR) (level 0, 1, 5, 10, hotspare supported)
(4860-T/TR/TR2) Up to eight Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (4860-T) or hardware RAID (4860-TR/TR2) (level 0, 1, 5, 10, hotspare supported)
ATA Subsystem:
Integrated dual channel Ultra ATA/100 controllers
SCSI Subsystem:
(4860-S) LSI Logic 21320 dual channel Ultra 320/m SCSI controller, 64-bit/133mhz PCI-X, two internal 68-pin Ultra 320/160/m/LVD/SE connectors, one external VHDCI connector
(4860-SR) LSI Logic MegaRAID 320-1 single channel Ultra 320/m SCSI RAID controller, 64-bit/66mhz, 64MB ECC cache, optional Battery Backup Unit (BBU)
(4860-T) Eight-port Serial ATA II4 controller with special HD activity header, 64-bit/133mhz PCI-X, Marvell 88SX6081 chipset
(4860-TR) 3Ware Escalade 9500S-8 eight-port Serial ATA RAID controller, RAID level 0, 1, 5, 10 & JBOD, 64-bit/66mhz, 128Mb ECC cache, optional Battery Backup Unit (BBU)
(4860-TR2) 3Ware Escalade 9550SX-8LP eight-port Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 128Mb ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
52X Ultra DMA/33 CDROM (standard) or CDRW/DVD-ROM/DVD+RW (optional)
Sound Subsystem:
None
Network Subsystem:
Integrated Intel 82546GB Dual port Gigabit Ethernet controller, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board
System Slots:
Two (2) 3.3V2 64-bit/100MHz bus mastering, full length PCI-X slots, PCI-X bus #1 (share with SCSI on 4860-S)
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #2 (share with Gig LAN)
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #3
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #4
One (1) PCI Express x8 slot
System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
1.44MB floppy drive
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 4U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(4860-S/T) Fixed 645W EPS12V power supply with low noise fan
(4860-SR/TR/TR2) 760W hotswap and triple redundant power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 7.0" (H) x 17.1" (W) x 25.39" (D)
Three3 (3) accessible 5.25" drive bays
(4860-T/TR/TR2) Serial ATA II backplane with special HD activity header
Four (4) 9cm hotswap centered fans
(4860-SR/TR/TR2) Two (2) 8cm hotswap rear fans
Sliding rails kit with telco mount support
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system