Lancelot 2869 Specifications.

Motherboard:
(2869-SS) Supermicro X8DT3-LN4F server board, E-ATX form factor
(2869-SR/TR2) Supermicro X8DTi-LN4F server board, E-ATX form factor

CPU:
Intel Xeon 5500 series processors (Gainestown), 4x256MB L2 cache, 8MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Intel Xeon 5600 series processors (Westmere), 6x256MB L2 cache, 12MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Chipset:
Intel 5520 (Tylersburg) chipset
ICH10R 6-port SATA II controller with HostRAID1

Memory Subsystem:
Twelve 240-pin DIMM banks supporting up to 96GB DDR3 ECC registered memory, 6 memory slots per CPU bank, triple channel memory bus

Note: Triple channel memory bus requires 3 or 6 modules installed per CPU bank.
Note: Two processors are required to populate 9 or 12 memory modules.
Note: Memory bus speed varies from 800mhz, 1066mhz or 1333mhz.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 8M display ram

Hard Disk Subsystem:
(2869-SS) Up to eight SAS or eight SATA drives. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

(2869-SR) Up to eight SAS or eight SATA drives. These drives can be configured as standalone unit or hardware RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

(2869-TR2) Up to eight SATA drives. These drives can be configured as standalone unit or hardware RAID.

ATA Subsystem:
None

SCSI Subsystem:
(2869-SS) Onboard LSI 1068E 8-port PCI-Express SAS controller
(2869-SR) 3Ware Escalade 9750-8i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)
(2869-TR2) 3Ware Escalade 9650SE-8LPML SATA 3Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
8X slim DVD-ROM optical reader

Sound Subsystem:
None

Network Subsystem:
Two onboard Intel 82576 Dual-port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots: (support low profile card only)
Three (3) PCI Express x8 (v2.0) slots
One (1) PCI Express x4 slot
Two (2) 32-bit/33MHz bus mastering PCI slots2, 3.3V

System I/O:
One (1) RS-232C 16550 serial port)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Four (4) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Floppy Drive:
Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 2U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(2869-SS) 560W EPS12V fixed power supply with active PFC
(2869-SR/TR2) 720W EPS12V hotswap and redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5in (H) x 17.2in (W) x 25.6in (D)
One (1) accessible slim size CDROM bay (used)
One (1) accessible slim floppy bay
SAS backplane with enclosure management
Eight (8) hotswap hard drive bays
Three (3) 8cm hotswap chassis fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535