Lancelot 1153 Specifications.

Motherboard:
(Lancelot 1153-S) Supermicro P4SC8 motherboard
(Lancelot 1153-T) Supermicro P4SCT+ motherboard
(Lancelot 1153-TR) Supermicro P4SCi motherboard

CPU:
Intel® Pentium® IV Northwood processor, 512K full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 478, .13 micron, HyperThreading (SMT)

Intel® Pentium® IV Prescott processor, 1MB full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 478, .09 micron, HyperThreading (SMT)

Chipset:
Intel E7210 (Canterwood-ES) server chipset
Intel 6300ESB Hance Rapid South Bridge
Dual channel DDR400 support 6.4GB/s memory bandwidth

Memory Subsystem:
Four DIMM banks supporting up to 4GB unbuffered PC-3200 SDRAM memory, non-ECC (ECC optional)
Note: Memory must be populated in pairs to enable the 6.4GB memory bandwidth.

Graphic Subsystem:
Integrated ATI Rage XL 8MB PCI

Hard Disk Subsystem:
(Lancelot 1153-S)
Up to four Seagate Ultra 320/m hard drives in capacity from 36GB to 146GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID or hardware RAID (optional) (level 0, 1, 5, 10, hotspare supported)

(Lancelot 1153-T/TR)
Up to four Serial ATA150 hard drives in capacity from 80GB to 250GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (1153-T) or hardware RAID (1153-TR) (level 0, 1, 5, 10, hotspare supported)

ATA Subsystem:
Intel® 6300ESB Dual channel UltraDMA/100 bus mastering IDE controllers
Intel® 6300ESB1 Serial ATA150 controller, 2 ports

SCSI Subsystem:
(Lancelot 1153-S) Integrated Adaptec 7902W dual channel Ultra 320/m SCSI-3 PCI controllers, 64-bit/66mhz, up to 30 devices, one internal 68-pin SCSI connector (channel A), one external VHDCI SCSI connector (channel B)

(Lancelot 1153-S) Optional Adaptec 2011S Zero Channel hardware-based Ultra 320/m SCSI RAID

(Lancelot 1153-T) Integrated Marvell 88SX5040 SATA controller, 64-bit/66mhz PCI-X, 4 SATA150 ports

(Lancelot 1153-TR) 3Ware Escalade 9500S-4LP serial ATA150 controllers with special HD activity header, 64-bit/66mhz PCI

CD-ROM Subsystem:
Optional

Sound Subsystem:
None

Network Subsystem:
One integrated Intel 82541 Gigabit Server adapter, 1000BaseTX
One integrated Intel 82547GI CSA Gigabit Server adapter, 1000BaseTX

System Slots:
One (1) 3.3V2 64-bit/66MHz bus mastering, full length PCI-X slot (used on 1153-TR or 1153-S with add-on ZCR controller)

System I/O:
One (1) RS-232C 16550 serial port, DB-9, rear access
Two (2) USB 2.0 ports, rear access
Two (2) USB 2.0 ports, front access
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
(Lancelot 1153-S) One (1) VHDCI SCSI port

Floppy Drive:
(Lancelot 1153-TR) 1.44MB floppy drive
(Lancelot 1153-S/T) Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
300W fixed power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 19.9" (D)
One (1) accessible slim size CDROM bay
One (1) accessible slim floppy bay
(Lancelot 1153-T/TR) Serial ATA backplane with special activity headers
(Lancelot 1153-T/TR) Four (4) coldswap/hotswap Serial ATA 150 drive bays
(Lancelot 1153-S) Ultra 320/m SCA backplane, 1 SCSI channel of 4 drives, SAF-TE
(Lancelot 1153-S) Four (4) hotswap SCA-2 1" hard drive bays
Three (3) 40mm chassis cooling fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535