Motherboard:
Supermicro P4SCE Pentium IV motherboard, ATX
CPU:
Intel® Pentium® IV Northwood processor, 512K full speed L2 cache,
800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 478, .13 micron, HyperThreading (SMT)
Intel® Pentium® IV Prescott processor, 1MB full speed L2 cache,
800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 478, .09 micron, HyperThreading (SMT)
Chipset:
Intel 875P chipset
Dual DDR400 channel supports 6.4GB/s memory bandwidth
Memory Subsystem:
Four DIMM banks supporting up to 4GB unbuffered PC-3200 SDRAM memory, non-ECC (ECC optional)
Note: Memory must be populated in pairs to enable the 6.4GB memory bandwidth.
Graphic Subsystem:
Integrated ATI Rage XL 8MB PCI
Hard Disk Subsystem:
Hitachi Desktar 7K250 80GB Serial ATA150 drive, 7200rpm, 8MB cache, 3 year warranty
ATA Subsystem:
Intel® ICH5R1 Dual channel UltraDMA/100 bus mastering IDE controllers
Intel® ICH5R1 Serial ATA150 controller, 2 ports
SCSI Subsystem:
None
CD-ROM Subsystem:
Optional 24X ATAPI slim CDROM
Sound Subsystem:
None
Network Subsystem:
Two integrated Intel 82450EM Gigabit Ethernet controller, 1000Base-TX
System Slots:
One (1) 32-bit/33MHz (5v) bus mastering PCI slot
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
1.44MB floppy drive
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 1U Rack mount chassis 250W power supply, FCC Class B
Dimensions: 1.7" (H) x 16.7" (W) x 22.6" (D)
Sliding rail kit included (front/telco mounting supported)
Two (2) fixed SATA hard drive bays
Optionally SATA2 backplane supporting coldswap/hotswap3 SATA hard drive bays
One (1) slim CDROM drive bay
One (1) floppy drive bay
Two (2) high speed chassis blowers
Preinstalled Software:
Red Hat Linux with ASL optimized kernel