Marquis K817 Specifications.

Motherboard:
AMD nForce 570 Ultra single Athlon 64 ATX motherboard

CPU:
AMD® Athlon® 64 processor, 90nm, 512K L2 cache, Socket AM2

AMD® Athlon® 64 FX, 90nm, 1M L2 cache, Socket AM2

AMD® Athlon® X2 processor, 65nm, 2x1M L2 cache, Socket AM2+, dual core

AMD® Phenom® X3 processor, 65nm, 3x512K L2 cache, 2M L3 cache, Socket AM2+, triple core

AMD® Phenom® X4 processor, 65nm, 4x512K L2 cache, 2M L3 cache, Socket AM2+, quad core

64-bit integer registers, 128-bit SSE/SSE2 registeres
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
Nvidia® nForce 570 Ultra MCP

Memory Subsystem:
Four DIMM banks supporting up to 8GB1 DDR2-800 unbuffered SDRAM memory, single or dual channel (128-bit) memory access

Note: 128-bit memory access requires even number of memory modules.

Graphic Subsystem:
ASUS Extreme N6200TC256/TD, Nvidia® GeForce PCX6200TC, PCI-Express x16, 64MB DDR, 350MHZ core, 350mhz DDR memory, 1x400Mhz RAMDAC, one digital port (DVI-D4), one analog port (DB-15), TV-Out (SVHS), single head display

Note: Connecting two monitors to the analog and digital ports will not enable dual head display.

Hard Disk Subsystem:
Up to four Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (817-T) or hardware RAID (817-TR2) (level 0, 1, 5, 10, hotspare supported)

SCSI Subsystem:
Onboard nForce5 Serial ATA II (3GB/s) controller with HostRAID2, six ports

(817-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

ATA Subsystem:
Single channel Ultra ATA/133 bus mastering IDE controller

CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:
Onboard ADI 1988 8-channel3 audio CODEC

Network Subsystem:
Onboard nForce5 Gigabit Ethernet adapter

System Slots:
One (1) PCI Express x16 slot
One (1) PCI Express x4 slot
Two (2) PCI Express x1 slots
Three (3) 32-bit/33MHz PCI slots

System I/O:
Four (4) USB 2.0 ports (rear)
Two (2) USB 2.0 ports (front)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) RJ-45 Ethernet port
Line-In, Line-Out, Microphone, 2xRear Speakers2, 1xCenter/Subwoofer2
One (1) coaxial S/PDIF Out port2

Floppy Drive:
1.44M 3.5-inch drive5

Mouse:
Logitech Optical Wheel Mouse, PS/2

Keyboard:
Keytronic KT-2000 104-key PS/2 keyboard

Chassis:
ATX Mid Tower case, FCC Class B, black bezel (standard) / beige (optional)
Sample Chassis Images:
     Front View, Front View w/ Hotswap Backplane
Two (2) front accessible USB 2.0 ports
Security locks for the front panel and side panel
450W ATX12V v2.2 power supply with active PFC, 12cm fan, low noise
Three (3) accessible 5.25" drive bays
(817-T) Four (4) internal 3.5" fixed drive bays (optional hotswap SATA backplane)
(817-TR2) SATA/SAS backplane with four (4) hotswap drive bays
One (1) 12cm outtake fan, ball bearing, low noise
(817-T) One (1) 9cm HD cooling fan, ball bearing, low noise
(817-TR2) One (1) 8cm HD cooling fan, ball bearing, low noise
Dimensions: 465mm (D) x 198mm (W) x 425mm (H)

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. When populating 4GB memory or higher, 1GB of space is lost due to PCI resource allocations
  2. Feature is not supported under Linux.
  3. Only the basic audio output is supported under Linux.
  4. Digital port not compatible with monitors that use DVI-I cable.
  5. Floppy drive occupies one of the 5.25in drive bay.
Phone: 1.877.ASL.3535