ASL - Omega 9225 Specifications

Motherboard:
Supermicro H8DME-2 Dual Opteron motherboard

CPU:
AMDŽ Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMDŽ Quad Core Opteron® Model 2300 processors, 65nm/45nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
Nvidia MCP55 Pro HyperTransport I/O Hub
NEC uPD720400 PCI-X I/O Hub
Single channel UltraDMA/133 bus mastering IDE controller

Memory Subsystem:
Sixteen DIMM banks supporting up to 32GB DDR2-667 or 64GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s (DDR2-667) or 16.8 GB/s (DDR2-533) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Onboard ATI ES1000 with 16MB display ram

Hard Disk Subsystem:
(9225-SS) Up to eight SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

(9225-TR2) Up to eight Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or disk array(s) using hardware RAID

SCSI Subsystem:
Onboard MCP55 Pro 6-port Serial ATA II controller

(9225-SS) LSI SAS3080X-R 8-port PCI-X SAS controller

(9225-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
8X DVD-ROM optical reader

Sound Subsystem:
None

Network Subsystem:
Two onboard MCP55 Pro PCI-Express Gigabit controllers, 1000BaseTX
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots: (support low profile expansion cards only)
Two (2) PCI-Express x8 slots
Two (2) 133mhz PCI-X expansion slots
Two (2) 100mhz PCI-X expansion slots
One (1) IPMI slot

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 2U Rack mount chassis, FCC Class B
Copper-based active CPU heatsinks
(9225-SS) 560W EPS12V fixed power supply with active PFC
(9225-TR2) 700W EPS12V hotswap & redundant power supply with active PFC
Dimensions: 3.5" (H) x 17.2" (W) x 25.6" (D)
One (1) accessible slim size CDROM bay (used)
One (1) accessible slim floppy bay
SAS backplane with enclosure management

Eight (8) hotswap hard drive bays
Three (3) 8cm hotswap chassis fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel
Note: Red Hat has announced major changes to the boxed product. Please read!

Phone: 1.877.ASL.3535