|
|
Linux
In SuSE Linux, DMA must be enabled manually in order to burn data on the built-in DVD-ROM/CDRW recorder. To enable DMA, run yast2, select Hardware, select IDE DMA Mode and choose DMA ON. Note this step is only required if the operating system has been reinstalled.
To reinstall the operating system on hard drive running off the onboard Silicon Image SATA controller, use the special SuSE boot CD to start the installation. The standard SuSE DVD boot media will not recognize any hard drive connecting to the onboard SATA controller.
In addition, do not use the SuSE DVD boot media to install the operating system on hard drive running off any 3Ware Escalade RAID controller if the machine has 4GB of physical memory or greater. This will result in data corruption. Rather, use the special SuSE boot CD to start the installation.
Kernel
For optimal performance and stability, use SuSE 2.4.21-193 kernel or higher.
Processor
Opteron Model 250 processors require BIOS revision 1.89. To obtain the BIOS update, please send request to techsupport@aslab.com.
|
 |
|
| Phone: 1.877.ASL.3535 |
|
|
