Sovereign 4882 Specifications.

Motherboard:
Supermicro X8DTi-LN4F server board, E-ATX form factor

CPU:
Intel Xeon 5500 series processors (Gainestown), 4x256MB L2 cache, 8MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Intel Xeon 5600 series processors (Westmere), 6x256MB L2 cache, 12MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Chipset:
Intel 5520 (Tylersburg) chipset
ICH10R 6-port SATA II controller with HostRAID1

Memory Subsystem:
Twelve 240-pin DIMM banks supporting up to 96GB DDR3 ECC registered memory, 6 memory slots per CPU bank, triple channel memory bus

Note: Triple channel memory bus requires 3 or 6 modules installed per CPU bank.
Note: Two processors are required to populate 9 or 12 memory modules.
Note: Memory bus speed varies from 800mhz, 1066mhz or 1333mhz.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 8M display ram

Hard Disk Subsystem:s
(4882-TR2) Up to twenty-four SATA hard drives. These drives can be configured as standalone unit or hardware RAID array(s) (Level 0, 1, 5, 6, 10)

(4882-SR) Up to twenty-four SATA or SAS hard drives. These drives can be configured as standalone unit or hardware RAID array(s) (Level 0, 1, 5, 6, 10)

Up to two Serial ATA 2.5in hard drives for the OS. These drives can be configured as standalone unit or software RAID (Level 0 or 1)

ATA Subsystem:
None

SCSI Subsystem:
(4882-TR2) One 3Ware Escalade 9650SE-24M8 Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Expess x8, 256MB ECC cache, optional Battery Backup Unit (BBU)

(4882-SR) 3Ware Escalade 9750-24i4e SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Slim 8X DVD+-RW dual layer optical writer

Sound Subsystem:
None

Network Subsystem:
Two onboard Intel 82576 Dual-port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots:
Three (3) PCI Express x8 (v2.0) slots
One (1) PCI Express x4 slot
Two (2) 32-bit/33MHz bus mastering PCI slots2, 3.3V

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Four (4) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 4U Rack mount chassis, FCC Class B
Copper-based active CPU heatsinks
1010W hotswap and redundant EPS12V power supply
Dimensions: 7" (H) x 19" (W) x 27.5" (D)
Six (6) Multi-lane SAS backplanes
Twenty four (24) hotswap 3.5in hard drive bays
Two (2) hotswap 2.5in hard drive bays (rear access)
One (1) slim optical drive bay (rear access)
Three (3) 120mm hotswap fans
Sliding rails kit

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535