Omega 9415 Specifications.

Motherboard:
nVidia nForce Pro 3600 Quad Opteron motherboard, WTX form factor

CPU:
AMD® Dual Core Opteron® Model 8000 processors, .09 micron, 1M+1M L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
nVidia® nForce Pro 3600 (MCP55 Pro) chipset
AMD® 8132 HyperTransport PCI-X I/O Tunnel
Single channel UltraDMA/133 bus mastering IDE controller

Memory Subsystem:
Sixteen DIMM banks supporting up to 32GB DDR2-667 or 64GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 42.8 GB/s (DDR2-667) or 33.6 GB/s (DDR2-533) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of two modules are required per processor.

Graphic Subsystem:
Onboard ATI ES1000 VGA with 16M video ram

Hard Disk Subsystem:
Up to 10 Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 10, hotspare supported

SCSI Subsystem:
Onboard MCP55 Pro 6-port Serial ATA II controller
One 3Ware Escalade 9650SE-12ML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Expess x4, 256MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
None

Sound Subsystem:
None

Network Subsystem:
Onboard dual Intel 82546EB 10/100/1000Mbps PCI-X Gigabit Ethernet controllers
Onboard Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
One (1) PCI-Express x16 slot (PCI-E video card unsupported)
One (1) PCI-Express x8 slot
Two (2) 64-bit/100 bus mastering PCI-X slots
Two (2) 64-bit/133MHz bus mastering PCI-X slots

System I/O:
One (1) RS-232C 16550 serial port
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
4U Rack mount chassis with rail kit, FCC Class B
Dimensions: 29.4in (D) x 19in (W) x 7in (H)
1000W redundant & hotswap EPS12V power supply
Two SAS backplanes

  • Activity LED connector for each hard drive
  • Ten (10) hotswap SATA 1in hard drive bays

Three (3) hotswap internal cooling fans
Three (3) hotswap rear exhaust cooling fans
Copper CPU heatsinks with passive cooling and airduct

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit edition

Phone: 1.877.ASL.3535