|
|
 |
 |
Lancelot 4864 Specifications.
|
 |
 |
 |
Motherboard:
Intel 5000V Blackford VS server board, ATX form factor
CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache,
1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771
Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache,
1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771
Chipset:
Intel 5000V Blackford VS server chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices
Memory Subsystem:
Six 240-pin DIMM banks supporting up to 16GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus
Note: Memory modules must be populated in pairs.
Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 16M display ram
Hard Disk Subsystem:
(4864-S) Up to eight Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (4864-S) or hardware RAID (4864-SR) (level 0, 1, 5, 10, hotspare supported)
(4864-T) Up to eight Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (4864-T) or hardware RAID (4864-TR2) (level 0, 1, 5, 10, hotspare supported)
ATA Subsystem:
Onboard single channel Ultra ATA/100 controller
SCSI Subsystem:
(4864-S) Onboard Adaptec 7902W dual channel Ultra 320/m SCSI controller, 64-bit/100mhz PCI-X
(4864-T) Eight-port Serial ATA II controller, 64-bit/133mhz PCI-X, Marvell 88SX6081 chipset
CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive
Sound Subsystem:
None
Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board
System Slots:
Two (2) 3.3V2 64-bit/100MHz PCI-X slots
Two (2) PCI Express x8 slots
One (1) 5V 32-bit/33mhz PCI slot
System I/O:
One (1) RS-232C 16550 serial port (COM A)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
Optional
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 4U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(4864-S/T) 650W EPS12V power supply with redundant cooling and PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 7.0" (H) x 17.2" (W) x 25.5" (D)
Three (3) accessible 5.25" drive bays
(4864-S) Ultra 320/m SCA backplane
Two SCSI channels with four drives per channel
SAF-TE controller for RAID management
Eight (8) hotswap SCA-2 (80-pin) hard drive bays
(4864-T) Serial ATA II backplane
Eight (8) hotswap Serial ATA hard drive bays
Four (4) 9cm hotswap center fans, double ball bearing
Two (2) 8cm hotswap exhaust fans, double ball bearing
Sliding rails kit with telco mount support
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system
Note: Red Hat has announced major changes to the boxed product. Please read!
Developers: To maximize the potential of the Xeon architecture, ASL recommends using the
Intel® C/C++ and/or Fortran compilers. These compilers will generate codes that are
optimized for the Pentium IV streaming SIMMD extensions and new instructions. For more
detail on the compilers, please visit here.
1: HostRAID is not supported under Linux.
2: Slot is incompatible with 5V PCI add-on card.
|
 |
 |
Phone: 1.877.ASL.3535 |
 |
|