Lancelot 3866 Specifications.

Motherboard:
Intel 5000P Blackford server board, E-ATX form factor

CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Chipset:
Intel 5000P Blackford server chipset
Intel ESB2 Enterprise Southbridge
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 32GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: For best performance, populate 4, 8, or 12 modules to enable quad channel memory access.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 32M display ram

Hard Disk Subsystem:
(3866-SS) Up to eight SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

(3866-TR2) Up to eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or hardware RAID.

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
(3866-SS) Onboard LSI 1068 8-port PCI-X SAS controller
(3866-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:
None

Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)

System Slots:
Two (2) 3.3V2 64-bit/133MHz PCI-X slots
One (1) PCI Express x8 slot (x4 link)
Two (2) PCI Express x8 slots (x8 link)
One (1) PCI Express x16 slot (x8 link)

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
1.44MB floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 3U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(3866-SS) 550W EPS12V fixed power supply with active PFC
(3866-TR2) 760W 2+1 EPS12V hotswap and redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 5.1" (H) x 17.1" (W) x 25.5" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay
Two (2) accessible 5.25in drive bays
Serial ATA II backplane
Eight (8) hotswap hard drive bays
Four (4) 9cm hotswap centered fans, double ball bearing
Two (2) 8cm hotswap rear fans, double ball bearing
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535