Supermicro X9DRT-IBQF server board, proprietory form factor
Intel Xeon E5-2600 series processors, up to 20MB L3 cache, up to 8GT/s QuickPath Interconnect, Sandy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Intel Xeon E5-2600 v2 series processors, up to 30MB L3 cache, up to 8GT/s QuickPath Interconnect, Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Intel C602J server chipset
Eight (8) 240-pin DIMM banks supporting up to 512GB DDR3-1600 (E5-2600) or DDR3-1866 (E5-2600v2) ECC registered memory, 4 memory slots per CPU bank, Quad channel memory bus
Note: Quad channel memory bus requires 4 modules installed per CPU bank.
Note: Two processors are required to populate more than 4 memory modules.
Onboard Matrox G200eW VGA controller with 16M display ram
Up to two (2) SATA 3.5in hard drives. These drives can be configured as standalone units or software RAID.
Intel® C602 PCH SATA controller, 2xSATA 6Gbs ports, 4xSATA 3Gbs ports
None
None
Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
Onboard Mellanox ConnectX-3 QDR Infiniband 40Gbps Controller
One (1) PCI Express x16 (v3.0) slot, low profile, half length
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
One (1) QSFP Infiniband connector
Optional
Optional
Two (2) hotplug dual-processor nodes
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 27.75" (D)
1280W EPS12V coldswap power supply, 80Plus Platinum Level, 95% efficiency
SAS backplane with enclosure management
Four (4) 3.5in hotswap hard drive bays
Six (6) 4cm chassis cooling fans
Sliding rail kit
Fedora, Ubuntu or CentOS 64-bit operating system